Intelligent heating, vacuum and bubble remover all in one machine, no need outer air pressure. Easy refurbishing LCD 

1、 Packing list:
 
①Laminator 1 set
②mold 1pc
③power cable 1pc
⑤non-dust cloth 1 bga
 
2、 Instruction：
 
①Power on machine
②Parameters setting (recommended):  
Lamination temper 40℃  Lamination pressure 0.3-0.4Mpa  
Lamination time 30S     Vacuum 97%
Bubble remove temper 45℃      Bubble remove pressure 0.5-0.6Mpa
Bubble remove time 10Min
 
③ put the protective film on the lcd gently, then place them in lamination chamber.
④“Start”
⑤Machine will be stop after lamination finished, take out it.
⑥put it in bubble remover chamber, “start” again.